Getting into a vehicular Collision repair aurora co is stressful enough, but after that, you need to get your vehicle repaired in order for it to function properly and you can get on with your life. Many people are afraid of being scammed by auto mechanics, but most people do not know how to verify the level of quality in collision repair. By understanding what to look for and how to perform a general inspection of the repair that has been performed, you can save money and ensure that your car has been properly repaired after a collision.
What to look for after a collision repair or dent repair
Make sure your vehicle’s seams are lined up correctly. If you notice that some of the joints are not perfectly aligned, it could be that there was an accident during the alignment or that the technicians simply did not do a proper job with repairing the collision. Also, the seams should be evenly spaced, with parallel lines from adjacent parts. Note the use of “shims”, which are small metal spacers Collision repair aurora co that technicians often use between parts. These should be used infrequently, as several tend to indicate improper repair of the structure. You will also want to check for minimal seam sealant. If you notice more than is typical, or the job seems sloppy, it should act as a red flag to you that the collision repair was not done properly.
How to check the quality of a welding job
In some collision repair cases, the technician will need to weld the metal of the vehicle. All areas where the metal was welded should look clean and tidy. The welds should look like part of the car’s metal; smoothly sanded and protected from corrosion. It is important that all added or replaced parts have been welded in the same areas where factory parts would have been welded. If not, the technician may not know what he was doing and the repair job may not be as good as it was. could be. Ask the technician to show you the areas where the car was welded, if they are visible.
Ask about the measurement system
A great way to determine if your vehicle is being repaired properly is to ask the body shop technicians about the type of measurement system they use to make sure everything is lined up correctly. High-quality workshops will use digital systems that accurately measure the frame and frame of a vehicle. The machine will compare current measurements to factory guidelines and then provide that information to technicians so they can make sure everything lines up correctly.
If you are still uncomfortable checking your own vehicle at the paint shop or collision repair shop, take a more qualified person with you to check it out. Before leaving the shop, you should thoroughly inspect your vehicle to determine whether the technicians did a great job or not. You should also get a report that covers all the procedures that were performed on your vehicle.
Collision repair: how much damage is too much?
From minor bumps to high-speed crashes, most car accidents result in damage that requires the expertise of an auto body repair shop. Collision repair isn’t always straightforward. Even minor accidents can cause expensive and timely repair body damage. The type of impact and the style of the damaged car play a role in determining how much damage has occurred.
Determination of a total loss
Many drivers think there is no hope if their insurance company says their car is “wrecked.” However, a car that is totaled is not necessarily irreparable. The extent of the damage has very little to do with whether or not an insurance company declares a total loss. Instead, the decision is based on the cost of repairing the collision compared to the fair market value of the car. If repairing the body damage will cost more than the car is worth, it is said to totalize.
Structural damage
Correcting damage to a vehicle’s chassis is one of the most expensive types of collision repair, but undoing structural damage is not impossible. A knowledgeable auto body repair shop will generally inspect a broken down vehicle first to see if it is misaligned. If the car does not meet the exact measurements of the manufacturer, advanced machines are used to return the frame to its original specifications.
Rear collisions
Depending on the speed, a car that is in the rear can take a lot of damage. Structural damage is not uncommon after a severe rear-end collision. The amount of damage will also depend on the car. In a recent IIHS study, a low-speed rear-end collision in a compact car with a poorly designed bumper can result in more than $ 3,500 in body damage. On the other hand, a car with dent-resistant plastic body panels can often be repaired for less than $ 200.
Frontal impacts
Head-on collision repair is typically more extensive than rear-end damage. At higher speeds, a frontal collision can damage the front bumper, hood, windshield, and side panels. If the damage is minor, the auto body technician may choose to repair the panels rather than replace them. Unless the parts are pre-painted, the body shop will also need to match the paint color and re-spray each panel before reassembling the car.
Rollovers
A rollover car generally has much more body damage than a vehicle involved in a head-on or rear-end collision. Damage to the frame is usually unavoidable in a rollover. There is a chance that every part of the car has suffered at least minor body damage. The decision to repair an overturned vehicle must be made carefully. Extensive damage like this could also require additional mechanical work.
Whether the damage to the car’s body appears to be major or minor, an experienced collision repair specialist should examine the car for invisible damage. Accidents can cause cosmetic damage that is fairly easy to repair, as well as frame damage or mechanical problems that are much more expensive to repair. Almost any type of collision damage can be repaired, but it is sometimes more profitable to scrap the vehicle.
