How to paint rattan furniture and other helpful tips. With the arrival of spring, more and more time is spent outdoors – on the terrace or in the garden. And you probably know that the best furniture for these places is rattan furniture. But, very often, because of weather conditions or just because of their age, these pieces of furniture become dull. Somewhat of tossing them in the garbage, you can forever organize some renovation. That is why in this article we show you in detail how to paint furniture made of rattan or wicker. You will also find many tips for maintaining furniture of this type. Not that it’s a difficult task, but it still has its peculiarities.
Wicker furniture and its characteristics
Wicker fittings come in all forms and extents and can operate in indoor or outdoor spaces. Typically, they are made from rattan, willow, reed, or bamboo and usually range in color from neutral brown to white and gray hues. And as for the rattan itself – it can say that it is a close relative of the palm tree. It is a type of vine that proliferates in the jungles of the Southeast region. It grows in the form of a pole and varies in diameter from one to three inches. Its vital core is very durable and even challenging to break.
How to paint rattan furniture, and what type of paint to choose?
Choosing what value you need to satisfy your furniture will depend on several factors. In particular, your personal preferences, the environment, and colors of your garden, your preferred theme, and more practical matters, such as availability. Generally, rattan furniture does not tend to be very bold when it comes to colors. Thus, colors such as bright reds or navy blues should avoid. However, an older, faded piece of furniture could completely change its look, thanks to a lick of glossy white paint. Regarding the type of paint, we recommend spray paint. It gives you a uniform and smooth finish that has no imperfections.
Preparation of furniture before painting
Before you start painting your rattan furniture, it is necessary to dust it thoroughly. You can use a feather duster or vacuum with an upholstery brush for this purpose. If the table has a glossy coating or has been painted previously, sand it with a fine-grit sanding block and then wipe it down with a soft cloth to remove dust. Then, if the furniture will use for exterior use, we recommend that you use a primer so that the paint adheres better drawing ideas.
How to paint rattan furniture step by step?
Your goal during such a task is to remove the old finish and apply a new finish without damaging the original fibers. That’s how :
- Close your business area with slip materials and work in a well-ventilated area or the open air.
- Scrape off as much chipped paint as possible with a metal brush. Always brush lengthwise rather than to the side to avoid scratching the fibers. You can likewise use a color abrasive, but do not scratch too deeply. It could cut the furniture’s fibers.
- Sand the edges in areas where paint remains to smooth them out. Wipe off sanding dust and debris with a damp cloth.
- Implement a coat of oil-based primer for all members of the space working a paintbrush. You can learn more practice a chroma sprayer.
- In the same way, apply a layer of paint, holding the box 15 to 20 cm from the cabinet. Let baked thoroughly and implement another cover.
- Let the last coat of paint dry for at least 24 hours before using the part.
How to paint rattan furniture giving it a natural look
Rattan furniture outdoors quickly becomes moldy and worn out, especially when you live in an area with a humid climate. Rather than getting cleared of it, move new life into your rattan with a coating of color. Give the appointments a simple look by working two different colored paints with the same method used for antique furniture, applying a base coat, and then a second, which you wipe off almost immediately. The darker color adheres to cracks and crevices in the rattan to give it a natural look. A thorough cleaning before starting removes broken rattan pieces and any mold for best results Flashlight.
Protection of rattan furniture
As a natural material, rattan fibers sometimes dry out and crack or squeak when constantly exposed to heat or direct sunlight. Therefore, keeping your rattan clean and conditioned prevents squeaking and spoilage. For example, it’s best to wipe down rattan once a week, if possible, using a clean, damp cloth and a mild household cleaner. A light spray is acceptable, but too much water can cause warping or weakening of the fibers and a build-up of mold in cracks and crevices of woven rattan. Additionally, regular use of a natural lubricant such as lemon oil or boiled linseed oil is recommended to maintain your rattan.
How to take care of wet rattan
Moisture can be the enemy of your rattan items. Fortunately, if you act quickly, you can still save your furniture. Start with absorbent towels, pressing them gently on either side of the rattan. Then a hairdryer set on low heat, moved gently over the rattan object, helps dry wet areas. If rattan is soaked for a while or stored in humid situations without sufficient air passage, it may produce a rank odor, showing shape. Finally, wipe off tiny mold stains with a 50/50 mixture of bleach and water applied with a smooth point brush so as a toothbrush.
As a natural material, rattan fibers sometimes dry out and crack or squeak when constantly exposed to heat or direct sunlight. Therefore, keeping your rattan clean and conditioned prevents squeaking and spoilage. For example, it’s best to wipe down rattan once a week, if possible, using a clean, damp cloth and a mild household cleaner. A light spray is acceptable, but too much water can cause warping or weakening of the fibers and a build-up of mold in cracks and crevices of woven rattan. Additionally, regular use of a natural lubricant such as lemon oil or boiled linseed oil is recommended to maintain your rattan.
Also Read: Expressions And Crafts Tips
